Instructions / Assembly
Step 3: Installing Fence Brackets
If posts are to be installed in level ground attaching brackets in advance
of post installation is easiest when using a measuring template for
faster repetitive bracket installation. It is easier to change a bracket in
the eld if necessary than to install brackets once posts are installed in
the ground.
Installed brackets provide a leveling point on each post.
DISTANCE FROM TOP OF POST TO SUPPORT BRACKET SURFACE
3’
4’
6’
8’
37.5” 49.5” 73.5” 99”
Panel Size
Bracket
location
Tip
Note: Brackets come packaged at the tip of the
post during shipping. They must be removed and
reattached in the channel of the post at the desired
height during installation.
Step 4: Post Spacing & Concrete Footings
DO NOT SCALE DRAWING
newBracket
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
WEIGHT:
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
BEND
TWO PLACE DECIMAL
THREE PLACE DECIMAL
APPLICATION
USED ON
NEXT ASSY
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
5
4
3
2
1
38
"
71.50" Max
Post Centers
10
" - 12"
18" -
24
"
Hole Depth
Hole Diameter
2
"
Good Neighbor Fence:
Same stone pattern on both sides
6.50"
3"
Inside
5"
Actual Panel Dimensions:
•
36"H X 69.75"W
Panel Weight: 36 lbs
•
Tolerances are: ±.5"
•
Caps
Minimum top
of post to ground
level
3'H X 6'W Panel
U.S. Patents: 7,478,797 / 7,635,114 Foreign Patents Pending
www.simtekfence.com
Date: Jan 2, 2014
Sheet 1 of 1
TM
Scale: not to scale
REV: D Barlocker
This drawing may not be altered or reproduced without the
permission of SimTek Fence
Model #:FP36X72
56” - 62”
3’ High Panels
Tools Needed
38
"
71.50" Max
Post Centers
10
" - 12"
18" -
24
"
Hole Depth
Hole Diameter
2
"
Good Neighbor Fence:
Same stone pattern on both sides
6.50"
3"
Inside
5"
Actual Panel Dimensions:
•
36"H X 69.75"W
Panel Weight: 36 lbs
•
Tolerances are: ±.5"
•
Caps
Minimum top
of post to ground
level
3'H X 6'W Panel
U.S. Patents: 7,478,797 / 7,635,114 Foreign Patents Pending
www.simtekfence.com
Date: Jan 2, 2014
Sheet 1 of 1
TM
Scale: not to scale
REV: D Barlocker
This drawing may not be altered or reproduced without the
permission of SimTek Fence
Model #:FP36X72
56” - 62”
- Dig a hole 10”-to-12” in diameter
- Holes should be 24” deep for 3ft and 4ft
panels and 36” deep fot 6ft panel. However,
please consult your local building codes
- Use one and a half or two 80 lbs ready mix
bags of concrete
- For a 3’ installation, the bottom
of the post should be cut leaving,
a 62” post (38” above ground and
24” below ground)
- Cut the bottom of the post. DO
NOT cut the top of the post
Tip