Installation Guide

INSTALLATION GUIDE

These instructions are designed to assist both professional installers and do-it-yourselfers of SimTek®

decorative privacy fence. These instructions are detailed to ensure an excellent ﬁnished fence.

A quality ﬁnished fence is a result of a quality installation. The layout must be consistent with ground

contours; posts must be appropriately spaced and properly anchored. Follow SimTek

installation instructions

carefully and your fence will be both structurally correct and a beautiful addition to your project or property.

Before any installation, check all local regulations regarding fencing, location of all buried utility lines (be sure

to call underground (811) prior to digging), and correct property lines. Be certain that you are in compliance

will all local codes, permits, county and state laws. Ensure that you have all the components needed to

complete your fence conﬁguration.

Tape Measure

Level

Auger or Post Hole Digger

Shovel

Power Drill

Circular Saw

Concrete

Spray Paint

Mallet or Hammer

Fence String

Reciprocating saw

TOOLS NEEDED

SimTek