Instruction manual

SIMTECH
Phone: [phone] • Fax: [phone]
www.SimtechUSA.com
7
WeldTech - MiniPlast Instruction Manual
1.060606
2.4. Measures of Organisation
• All equipment required for personal safety is to be provided by the owner.
• All available safety equipment is to be inspected regularly.
• The working instructions have to be permanently kept at the place of use of the machine. They
are to be at the operator‘s disposal at any time and without much effort.
• In addition to the manual, the common valid and the local accident protection rules and
regulations for the environmental protection must be available and followed.
• Every time the machine changes hands or is being rent to third persons, the working
instructions are to be sent along with and their importance is to be emphasized.
2.5. Instructions for the Staff
• Only skilled and trained persons are allowed to work at the machine.
• It must be clearly defined who is responsible for transport, mounting and dismounting,
starting the operation, setting and tooling, operation, maintenance and inspection, repair and
dismounting.
• A person who is being trained may only work at the machine under supervision of an
experienced person.
2.6. Structural Modifications on the Machine
• No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer.
• Machine parts which are not in a perfect condition are to be replaced immediately.
• Only use original SIMTECH spare and wear parts.
2.7. Cleaning the Machine
The used materials and tissues are to be handled and disposed of properly, especially:
• When cleaning with solvents
• When lubricating with oil and grease.
2.8. Danger while Handling the Machine
The machine SIMTECH MINIPLAST 2 is constructed according to the latest technical standards and
the acknowledged technical safety rules. However, dangers for the operator or other persons standing
nearby may occur. Also material damages are possible.
The machine may only be used
• According to the purpose-oriented usage
• In safety technical impeccable status
Disturbances which may affect the safety of the machine must be cleared immediately.