Instruction manual

SIMTECH
Phone: [phone] • Fax: [phone]
www.SimtechUSA.com
4
WeldTech - MiniPlast Instruction Manual
1.060606
1.3. Safety Measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products
standing nearby can be damaged or destroyed.
Persons being in the endangered area may be injured. Therefore these working instructions have
to be thoroughly read and the corresponding safety regulations must be necessarily adhered to.
1.4. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the according European standard specifications. The development,
manufacturing and mounting of the machine were made very carefully.
1.5. Designation of the Product
The product is designated by a sign at the basic frame.
It contains the type of the machine, the serial number and the year of construction.
1.5.1 Technical data
1.5.1.1 SIMTECH MINIPLAST 2 General Data
-ATERIAL 000%($06$&0%
0IPEDIAMETERRANGE /UTSIDE MM
3HEETSTEELCARRYINGCASELXWXH XXMM
7EIGHTWITHOUTPACKING KG
&USE !
7IRECROSSSECTION MMÁ
%MISSIONS 4HESOUNDINTENSITYLEVELISBELOW
 D"!
7HENUSINGTHENAMEDPIPEMATERIALS
 ANDWHENWELDINGBELOW#NO
 TOXICANTDAMPARISES
!MBIENTCONDITIONSINTHEWELDINGAREA +EEPTHEWORKSHOPCLEANNODUSTAT
 THEWELDINGAREA
DONOTWELDBELOW#IFNECESSARY
 PREHEAT
AVOIDHUMIDITYIFNECESSARYUSEA
 WELDINGTENT
AVOIDSTRONG
SUNRAYSINFLUENCE
PROTECTFROMWINDSHUTTHEPIPEENDS