Instruction manual

SIMTECH
Phone: [phone] • Fax: [phone]
www.SimtechUSA.com
3
WeldTech - MiniPlast Instruction Manual
1.060606
1. Description of the Product
This chapter gives important basic information about the product and its prescribed use. All technical
details of the machine are put together as a general arrangement.
1.1. Usage and Purpose-oriented Use
The SIMTECH MINIPLAST 2 has been designed for heating element butt welding of pipes and
fittings out of PE, PP and PVDF with a diameter range of Ø = 20 - 110 mm.
The machine is kept small so that it can easily be used in the pipe system.
For moulded narrow bends and fittings, special small basic clamping devices are available.
All use going beyond is not purpose-oriented.
The manufacturer is not responsible for damages caused by misuse. The risk is held only by the
user.
Also part of the purpose-oriented use is
• Respecting all the indications of the working instructions and
• Performing the inspection and maintenance works.
1.2. Overview
1
2
3
4
5
.O $ENOMINATION
 -ANUALPLANER
WITHOUTILLUSTR %LECTRICPLANEROPTIONAL
 "ASICMACHINE
 4ABLESUPPORT
 (EATINGELEMENT
 2ECEPTIONBOX