Instruction manual

SIMTECH
Phone: [phone] • Fax: [phone]
www.SimtechUSA.com
1
WeldTech - MiniPlast Instruction Manual
1.060606
TABLE OF CONTENTS
1. DESCRIPTION OF THE PRODUCT ..................................................................................................... 3
1.1 Usage and Purpose-oriented Use ............................................................................................ 3
1.2 Overview .............................................................................................................................. 3
1.3 Safety Measures ..................................................................................................................... 4
1.4 Conformity ............................................................................................................................ 4
1.5 Designation of the Product ..................................................................................................... 4
1.5.1 Technical data ......................................................................................................... 4
1.6 Equipment and Accessories: ................................................................................................... 5
2. SAFETY RULES .................................................................................................................................... 6
2.1 Explanation of the Symbols and Indications ............................................................................ 6
2.2 Obligations of the Owner ...................................................................................................... 6
2.3 Obligations of the Worker ..................................................................................................... 6
2.4 Measures of Organization ..................................................................................................... 7
2.5 Instructions for the Staff ......................................................................................................... 7
2.6 Structural Modifications on the Machine ................................................................................ 7
2.7 Cleaning the Machine ............................................................................................................ 7
2.8 Danger while Handling the Machine ...................................................................................... 7
2.9 Dangers caused by Electric Energy ......................................................................................... 8
2.10 Specific Dangers .................................................................................................................. 8
2.10.1 Danger of being burnt by Heating Element, Reception Box and Welding Area .......... 8
2.10.2 Danger of Stumbling over Electric Wires ................................................................. 8
2.10.3 Danger of Cutting / Squeezing / Catching Clothes ................................................... 8
2.11 Warranty and Liability .......................................................................................................... 9
3. FUNCTIONAL DESCRIPTION ...........................................................................................................10
4. OPERATING AND INDICATING ELEMENTS ......................................................................................11
4.1 Elements on the Basic Machine / Table Support .....................................................................11
4.2 Elements at Heating Element and Planer ................................................................................12
4.3 Elements at the Electric Planer (optional) ...............................................................................13
5. STARTING AND OPERATING ............................................................................................................14
5.1 Starting ................................................................................................................................14
5.1.1 Exchanging the Reduction Inserts .............................................................................15
5.2 Welding Process ...................................................................................................................15