Instruction manual

SIMTECH
Phone: [phone] • Fax: [phone]
www.SimtechUSA.com
19
WeldTech - MiniPlast Instruction Manual
1.060606
SR45 = PN3.2; SR90 = PN6; SR150 = PN10; SR232 = PN16
PVDF Welding Table
Diameter Weld Beginning Melt Pressure Heating Change Over Time Weld Cooling
& Wall Thickness Temp °C & Bead Height Time (Remove Heater Pressure Time Before
(Kg./Force) (Pressure at & Gradually (Kg./Force) Removing
Near 0 Lbs. Increase to Clamps
Force) Weld Pressure)
Seconds
Pressure Height Seconds
Change Bring To
Minutes
Over Pressure
½” PN16 230 1.36 1/32” 25 4 5 1.36 3
¾” PN16 230 2.82 1/32” 25 4 5 2.82 3
1” PN16 230 3.18 1/32” 30 4 5 3.18 3
1 ¼” PN16 230 3.64 1/32” 35 4 5 3.64 4
1 ½” PN16 230 5.45 1/32” 40 4 5 5.45 5
2” PN16 230 7.27 1/32” 45 4 5 7.27 5
2 ½” PN16 230 7.27 1/32” 50 4 5 7.27 5
3” PN16 230 10.00 1/16” 40 4 5 10.00 6
4” PN16 230 15.45 1/16” 50 4 5 15.45 7