Instruction manual

SIMTECH
Phone: [phone] • Fax: [phone]
www.SimtechUSA.com
8
WeldTech - MiniPlast Instruction Manual
1.060606
2.9. Dangers caused by Electric Energy
Only skilled persons are allowed to work at electrical appliances.
• The electrical equipment of the machine has to be checked regularly. Loose connections and
damaged cables have to be replaced immediately.
• The heating element has to be protected from rain and dropping water, if need be use a welding
tent.
• According to VDE 0100, the use on construction sites is only allowed with a power distributor
with a FI-safety switch.
2.10. Specific Dangers
2.10.1 Danger of being burnt by Heating Element, Reception Box and Welding Area
You can burn yourself, inflammable materials can be ignited! The heating element is heated up to more
than 200° C !
• Do not leave the heating element unsupervised.
• Take enough safety distance to inflammable materials.
• Do wear safety gloves.
• Always put the heating element back into the reception box before and after each use.
• Transport the heating element at the handle only, do not touch the surfaces of the heating
element.
2.10.2 Danger of Stumbling over Electric Wires
• Make sure that no person has to step over the wires.
2.10.3 Danger of Cutting / Squeezing / Catching Clothes
• Always put the planer back into the reception box before and after each use.
• Transport the planer at the handle only and do not touch surfaces.
• Do not put hands between clamped pipe ends.
• Make sure that your clothes are not caught by the planer.