Operation Manual

20 |
Installation | TP10, TP22 & TP32 User Guide
If the rate of turn or boat speed is too fast, the Port LED will flash.
Either slow the boat, or reduce the angle of turn. If the rate of turn
or boat speed is too slow, the Starboard LED will flash – either
increase the boat speed, or increase the angle of turn. A short
beep will indicate that the calibration has been successful and the
Tillerpilot will return to Standby mode. If the calibration has been
unsuccessful, after a period of four minutes a long beep will sound.
¼ Note: If the calibration routine keeps failing after repeated attempts,
the Tillerpilot may be experiencing excessive magnetic deviation
that it cannot compensate for. Check the area within 1 m (3 ft) of the
Tillerpilot for likely sources, such as cockpit speakers or large metallic
objects – if these cannot be relocated, it may be necessary to fit an
external compass (“Using an external compass” on page 8).
TACK