Installation manual

Simrad SP90
62
851-164510 / Rev.E
7.3 SP90 Cable plan
Installation locations
(1) = Wheelhouse
(2) = Sonar room
List of units
(A) = Display monitor
(B) = Sonar Processing Unit
(C) = Sonar Operating Panel
(D) = Sonar Interface Unit
(E) = Transceiver Unit
(F) = Hull Unit
(G) = Motor Control Unit
(H) = Loudspeaker
List of cables
SP90/C1: Power to display monitor
SP90/C2: Display monitor
SP90/C3: Power to Sonar Processor Unit
SP90/C4: Control
SP90/C5: Serial line
SP90/C6: Cheapernet coax cable
SP90/C7: USB
SP90/C8: Keyboard A
SP90/C9: Keyboard B
SP90/C10: Loudspeaker
SP90/C11: Pulse log
SP90/C12: Course gyro
SP90/C13: Additional peripheral system
SP90/C14: Additional peripheral system
SP90/C15: Control
SP90/C16: Transducer cables
SP90/C17: Hull unit control
SP90/C18: AC mains to Transceiver Unit
SP90/C19: AC mains to Hull Unit
SP90/C20: Additional peripheral system
SP90/C21: Additional peripheral system
SP90/C22: Additional peripheral system
SP90/C23: Additional peripheral system
SP90/C24: Scientific data output
SP90/C25: Synchronization
Cables identified with an asterix (*) on
the drawing are provided by Simrad.