Installation manual

Cable layout

851-164510 / Rev.E

7.2 System cabling

Cable layout

Cables are identified according to individual cable numbers

(Cxx), and references are made to dedicated cable drawings.

Cable information includes:

• Required specifications

• Equipment they are connected to

• Corresponding terminations

System and shipyard cables

Cables fall into two categories:

• System cables supplied by Simrad with the standard SP90

system delivery.

• Shipyard cables provided by the shipyard performing the

installation, or the shipowner. Cables to be provided by the

installation shipyard are specified in the cable specifications.

Note that the cable specifications provided are the minimum

acceptable. Detailed cable information is provided for the:

- Connections at each end (including reference to the

corresponding: system unit, terminal board identification

and plug/socket to be used).

- Number of cores

- Recommended type

- Minimum specifications

Note: Simrad accepts no responsibility for damage to the system or

reduced operational performance caused by improper wiring.