Installation manual

Wheelhouse units
53
851-164510 / Rev.E
Display unit
The display unit should be located so that it is best protected
from glare which reduces readability. It may be:
• Panel mounted
• Desktop mounted
• Bulkhead mounted
• Overhead mounted
Refer to the display unit’s instruction manual for the compass
safe distance.
Sonar Operating Panel
An ergonomiclly correct Operating Panel helps to reduce
operator fatigue. It should be mounted in a nearly horizontal
position to facilitate trackball operation, and within easy
viewing range of the display unit.
The compass safe distance must be allowed for when planning
the unit’s location:
• Standard compass 0.05 m.
• Steering compass 0.05 m.
SonarProcessorUnit
The Sonar Processor Unit (MC70) should be installed inside a
console, in a cabinet or on a desk. Make sure that adequate
ventilation is available to avoid overheating.
The compass safe distance must be allowed for when planning
the unit’s location:
• Standard compass 0.15 m.
• Steering Compass 0.1 m.
Sonar Interface Unit
The Sonar Interface Unit should be mounted vertically with the
cable inlet downwards on a side wall inside a console, cabinet or
desk. Provide enough space for easy access for cable
connections to the unit.
The compass safe distance must be allowed for when planning
the Sonar Interface Unit’s location:
• Standard compass TBD m.
• Steering Compass TBD m.