Installation manual

Drawing file
197
851-164510 / Rev.E
AC 3-phase mains to Hull Unit
This cable is used to connect 3-phase AC power to the Motor
Control Unit, and thus also to the hull unit’s hoist motor. The
drawing also illustrates how to set up the motor connections to
match the power available.
Caution: Observe the difference between 230 Vac and
380/440 Vac wiring on the hoist motor!
Minimum cable specifications
Conductors 3x2.5mm2
Screen Seperate conductor, 2.5 mm2
Voltage 750 V
Max.diameter 17 mm