Installation manual

Simrad SP90
196
851-164510 / Rev.E
Standard AC power cable
This cable is a standard three-wire power cable. It is
commercially available in standard lengths, or may be produced
locally to suit the specific installation needs. The instrument end
is terminated in a standard IEC female socket, while the other
end is terminated in a plug suitable for the local standard.
Note: Different cable colours may be used for the “live” and
“neutral” wires. Ground is however always on green/yellow.
Conductors 2x1.5mm
2
+GND
Screen None
Voltage 750 V
Max. diameter Set by the plugs