Installation manual

Simrad SP90
186
851-164510 / Rev.E
13 DRAWING FILE
This chapter contains cable details and installation drawings.
13.1 Cable details
The following drawings show the cable details.
→ C1 - W301 AC power, page 196
→ C2 - W500 VGA cable, page 199
→ C3 - W301 AC power, page 196
→ C4 - W206A Sonar Interface Unit Control, page 188
→ C5 - W206A Sonar Interface Unit Serial, page 188
→ C6 - W206B Cheapernet, page 189.
→ C7 - W501 Operator panel (USB), page 200
→ C8 - W625 Keyboard A, page 201
→ C9 - W625 Keyboard B, page 201
→ C10 - W208A Loudspeaker, page 190
→ C11 - W208B Serial line interfaces, page 191
→ C12 - W208B Serial line interfaces, page 191
→ C13 - W208B Serial line interfaces, page 191
→ C14 - W208B Serial line interfaces, page 191
→ C15 - W208D Control signals to transceiver, page 193
→ C16 - Transducer cable, N/A
→ C17 - W235 Hull Unit control, page 195
→ C18 - W301 AC power, page 196
→ C19 - W312 AC power to hull unit, page 197
→ C20 - W208B Serial line interfaces, page 191
→ C21 - W208B Serial line interfaces, page 191
→ C22 - W208b Serial line interfaces, page 191
→ C23 - W208b Serial line interfaces, page 191
→ C24 - W400 Scientific data output, page 198
→ C25 - W208F Synchronisation, page 194
13.2 Installation drawings
If required, certain drawings may be supplied on AutoCad
format. To order, contact Simrad and refer to the drawing
numbers in the bottom right corner of the frame.
Bridge and sonar room units
→ Sonar Operating Panel, outline, page 202
→ MC70 Sonar Processor Unit outline, page 203
→ Sonar Interface Unit outline, page 204
→ Transceiver Unit outline, page 205
→ Loudspeaker outline, page 206