Installation manual

Start-up procedures
115
851-164510 / Rev.E
Off centre
16 Check the Off centre function.
a Move the cursor to any position inside the echo area.
b Press the Off Centre button (field 8).
c Check that the ship’s symbol changes its position to
where the cursor is.
d Select Mode 2 and then Mode 1 to move the ship
symbol back to the screen centre.
Training
17 Check the Training function.
a Press the left and right Manual train buttons
repeatedly (field 9, right two buttons).
b Check that the white audio line on the screen trains
correspondingly.
c Try both directions.
18 Check the Position Track function.
a Move the cursor to any position on the screen.
b Press the Position Track button (field 9).
c Check that a circle appears at the cursor, and that the
audio line moves to the circle.
19 Check the Target Track function.
a Move the cursor to an echo.
b Press the Target Track button (field 9).
c Check that a violet circle appears at the cursor, and that
the audio line moves to the circle.
20 Check the Manual train function.
a Press the Manual training button (field 9).
b Check that the violet circle disappears.
21 Check the Auto search function.
a Press the Auto Search button (field 9).
b Check that the audio line starts a search within the
displayed sector limits.
c Press the Manual buttontostopthesearch.