Specifications

Changing the default settings | 15
4 Changing the default settings
General
The factory default settings may all be changed in the
User setup, accessed as shown in the illustration.
Refer also to the Operation flow chart in the Basic
Operation chapter.
Light bank selection
The light bank function is used to globally control light
settings for a group of units that are connected via the
SimNet network.
By assigning several units to the same group, the light
adjustment on one unit will be effective on the rest of
the members in the same group.
MODE
SETUP
3 s
RPM70/RPM80:
RPM
INDICATION
SP70/SP80:
SPEED
INDICATION
LIGHT
BANK
SELECTION
MAIN MODE
USER SETUP
SELECT
Save selection
Simrad
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
None
Light bank
When selecting
a light bank a
beep is heard
Pointer
MODE
SETUP
SELECT
+
1 s
Default value: Simrad
If you prefer one instrument to stay outside any group
for independent light adjustment, you select “none”.