Specifications

10 | Installation
Installation setup
After installation, the system must be configured to read
the preferred input signal before the instrument is ready
for use.
The Installation Setup is accessed as shown in the
illustration.
RPM70/RPM80:
RPM
INDICATION
SP70/SP80:
SPEED
INDICATION
MAIN MODE
MODE
SETUP
SELECT
10 s
+
MODE
SETUP
SELECT
+
5 s
MODE
SETUP
SIGNAL
INPUT
RESET
INSTALLATION SETUP
SELECT
SimNet
Save selection
Demo
MODE
SETUP
SELECT
+
1 s
Pointer indication
Refer also to the Operation flow chart in the Operation
section.
Input signal type
SimNet and Demo mode are selectable inputs on the
RPM70/RPM80 and SP70/SP80.
In Demo mode the instrument simulates data to be
distributed on the SimNet.
Use the right button to select signal type. The pointer
position will change accordingly as shown in the table.
Press both keys simultaneously to save the input signal
type.
Local SimNet reset
When SimNet is selected as Signal Input you can
reset the SimNet input sources by pressing both keys
simultaneously.
Press both keys for 5 seconds to return to Main mode.