Installation manual

Cable layout and connections
59
851-164574 / C
C11-C14 / C20-C25 Peripheral equipment
These are cables used to interface peripheral equipment. They are
described in detail in chapter Peripheral equipment.
→ See page 75.
C15 - Transceiver Unit
This is a data cable fr o m the Sonar Interface Unit in the wheelhouse
to the Transceiver Unit in the sonar room. The cable is provided
by Simrad.
→ Cable details on page 178.
C16 - Transducer cable
The transducer cables are provided by the manufacturer. They are
physically connected to the top of the transducer shaft. All
transducer cables are provided by Simrad.
C17 - Motor control
This cable is connected between the Transceiver Unit and the
Motor Control Unit mounted on the Hull Unit.
→ Cable details on page 180.
Note that the physical properties of this cable is identical to those
of C15. Therefore, any surplus of the C15 cable can be used.
C19 - Motor control mains
This cable provides AC mains to the Motor Control Unit. The cable
must be provided by the installation shipyard.
→ Cable details on page 182.