Installation manual

Cable layout and connections
55
851-164574 / C
7 CABLE LAYOUT
7.1 Introduction
This chapter describes the installation requirements f or SP60
system wiring. These instructions must be used together with the
applicable cable plan.
Note All electronic installations and corresponding wiring must be in
accordance with the vessel’s national registry and corresponding
maritime authority and /or classification society.
If no such guide-lines exist, Simrad AS recommends that Det
Norske Veritas (DNV) Report No. 80-P008 «Guidelines for
Installation and Proposal for Test of Equipment» be used as a
guide.
The f ollowing information is provided:
→ System cabling, page 56.
→ Cable plan, page 57.
→ Cable specifications, page 58.
→ Wheelhouse cabling, page 60.
→ Sonar room cabling, page 66.
More information concerning cabling is found in these chapters:
→ General cable requirements, page 72.
→ Peripheral equipment, page 75.