Installation manual

Simrad SP60
34
851-164574 / C
4HULLUNIT
4.1 Introduction
The hull unit is a crucial part of the sonar system. Due to its
physical size and weight, and the fact that the trunk penetrates the
vessel hull, it is very important that the hull unit is installed and
secured properly.
This chapter describes the physical installation of the hull unit. The
following information is pr ovided.
→ Overview of hull unit models, page 35.
→ Unpacking, page 36.
→ Mounting, page 37.
→ Bleeding air, page 38
→ Mechanical support, page 39.
→ Transducer alignment, page 34.
→ Installation check-list, page 41.