Installation manual

Simrad SP60
4
851-164574 / C
1.3 Scope of supply
Main units
The standard Simrad SP60 sonar system is comprised of the
following main units:
Unit Order number
Operating Panel SH8--203593
Sonar Processor Unit SP6--207893
Sonar Interface Unit SP7--207891
T ransceiver Unit SP6--205770
SP60 Hull Unit SP6--205740
Note The display unit i s not included in the standard delivery, but may
be ordered as an option. Refer t o Display Unit below for more
information.
→ Refer to page 150 for more information concerning weights and
dimensions of the various units.
General
The Simrad SP60 Sonar system is delivered without a dome
system. The hull unit employs a Simrad SQ4 installation trunk
allowing the SP60 to be m ounted in existing SQ4, SR 240 or SP270
trunks.
Note The Simrad SP60 installation trunk is not included in the standard
delivery. It may be fabricated by the shipyard, or supplied by
Simrad as an option. (Refer to Options below for more
information.)
The optional trunk supplied by Simrad is approved by Det Norske
Veritas (DNV) and includes a blind cover and gasket. The
drawings of the trunk and blind cover are included i n the drawing
file.
→ Refer to the Sonar trunk drawing 830-113361 on page 194.
→ Refer to the Blind cover drawing 830 -113362 on page 195.
Options
The following options may be ordered at an additional charge to
augment the standard Simrad SP60 sonar system delivery.
Hull Unit
The standard SP60 Hull Unit can be lowered 1.0 meters at a speed
of 15 knots.