Installation manual

Simrad SP60
174
851-164574 / C
C6 - Cheapernet communication
This is the Cheapernet signal cable between the Sonar Interface
Unit and the Sonar Processor Unit. The length is approximately 1.5
m. Note that one end of the cable is equipped with a
“T-connection”. This end of the cable must be connected to the
Sonar Processing Unit.
W206B / Rev.A
Cheapernet cable
This end connects
to J7 in the Sonar Interface
Unit.
This end connects to the circuit
board in slot J4 on the rear side
of the Sonar Processing Unit.
50 ohms termination
The C6 cable is provided by the manufacturer.