Installation manual

Start-up procedures
101
851-164574 / C
b Press the Horizontal tab to bring up this menu.
c Press the Gain H- and Gain H+ buttons repeatedly (field
4 on the Operating Panel).
d Check that the Gain readout in the menu and on the top
of the tilt indicator changes from 0 to 50.
8 Check the Horizontal range readout.
a Press the Range H- and Range H+ buttons repeatedly
(field 5 on the Operating Panel)
b Check that the Range readout in the menu and on the top
of the tilt indicator changes accordingly.
Vertical gain and range
9 Check the Vertical gain readout.
a Press the Vertical tab to bring up this menu.
b Press the Gain V- and Gain V+ buttons repeatedly (field
4 on the Operating Panel).
c Check that the Gain readout in vertical the menu can be
changed from 0 to 50.
10 Check the Vertical range readout.
a Press the Range V- and Range V+ buttons repeatedly.
b Check that the Range readout in the Vertical menu
changes corresponding the horizontal ranges.
Full screen
11 Check the Full screen function.
a Press the Menu button (field 6, left button)
b Check that the menu disappears for a Full Screen echo
presentation.
c Press the button once again to recall the menu.
View menu
12 Check the View menu.
a Move the cursor to any position i nside the echo area.
b Press the View button (field 6).
c Check that the View menu appears. (Note that this menu
must be regarded as an object menu, and it appears next
to the cursor in the echo field.)
d Press the Select button again to remove the menu.