Installation manual

Simrad SP60

851-164574 / C

S 302

K301 K302

HAND CRANK

S 303

(CD3125 / WMF / GIF)

S301

S302

K302

S303

Hand

crank

REMOTE

HOIST STOP

LOWER

K301

Figure 31 The

Motor Control Unit

8 Set the hoisting/lowering switch S302 to Hoist position, and

check that the hoisting contactor K301 is activated when

pressing the hand crank safety switch S303.

9 Set the hoisting/lowering switch S302 to the Lower position

and check that the lowering contactor K302 is activated

when pressing the hand crank safety switch S303.

10 Set the hoisting/lowering switch S302 to the Stop position.

11 Place the hand crank back into its storage position in the

Motor Control Unit.

12 Activate the hoisting contactor K301 by setting t he

hoisting/lowering switch S302 to Hoist position, and check

if the contactor is deactivated when pressing the upper limit

switch S304 upwards.