Installation manual

Simrad SP60

850-164575 / Rev.D

Options

General

The standard SP60 sonar is a single 26 kHz version with beam

stabilization.

The beam stabilization was an optional function until 1 January

2003. After that date, the function was included with the

standard sonar delivery.

The options described below are pre-programmed into the

standard software version, and a code word is required to make

the actual option available. Simrad offers a 1 month free test

period for certain options. Note that the Scientific Output

function is not available for such a test period.

For a permanent installation of a chosen option, a new code

word will be released from Simrad when the option is ordered.

Triple- or multiple-frequency

In addition to the standard 26 kHz frequency, options are

available for triple and multiple frequencies.

 In the triple-frequency version, you can select between 24

kHz, 26 kHz and 28 kHz.

 In the multiple-frequency version you can select from 11

frequenciesfrom20to30kHzin1kHzsteps.

These selections are particulary useful when it is necessary to

suppress interference from other sonars.

Scientific output

The Scientific Output is designed for research purposes. When

activated, the following data are available on an Ethernet (LAN)

output:

 Beam data

 Target data

 Own ship data

 Gear data

The scientific output option may also include software for a

Scientific Data Logger.

Note that this option is not available for a free test period.