Specifications

Setting-Up
20220752J 35
Screen 6
SHOP MODE [SHOP]
The instrument has a demonstration mode that can be activated
by selecting ‘Shop’ On. This function is very useful for dealers
when they want to demonstrate the IS15 system or when it is put
on display on a show. The Shop Mode is turned off when power
is turned off.
Use the above procedure to select and activate the Shop mode.
The display will show SHOP and then start flashing ‘OFF’ or
‘ON’. Select the preferred mode.
Note ! When in Shop Mode the instruments will display real data if any
data is received.
Screen 7
NMEA IN/OUT [n 183]
This screen allows you to manually change the NMEA ‘talker’
port = NMEA OUT to a ‘listener’ port = NMEA IN. Hence you
need not make a Master reset or a Communication reset. Refer to
chapter 6.1 First time turn on. See also note below.
The setting is local to each instrument.
Press the
or button to select NMEA OUT. Press and hold
the
button to confirm.
Note ! If there is an active ‘talker’ connected to the NMEA port, you
will not be able to change this port from ‘IN’ to an ‘OUT’ port
unless the ‘talker’ is disconnected.
Screen 8
ROBLINK ON/OFF [robl]
It is possible to turn off the Roblink.
The display reads ‘robl’. Press the
button and hold for 2
seconds. The LCD display shows (flashes) ‘Id:x’, ‘x’ being the
instrument’s present Roblink Id. number.
Press the
or button to select Roblink OFF. Press and
hold the
button to confirm.