Specifications

IS15 Wind Manual
32 20220752J
6.2 Installation and Calibration Menu
The installation menu is arranged as follows:
Screen
Display
Screen 1 Screen 2 Screen 3 Screen 4
Analog
Digital
Apparent wind angle
Illumination bank
bAn.1
Apparent wind angle
Wind speed unit
SPd1
Apparent wind angle
VMG to wind unit
SPd1
Apparent wind angle
Wind angle, automatic
calibration
OFS.A
Screen
Display
Screen 5 Screen 6 Screen 7 Screen 8
Analog
Digital
Apparent wind angle
Wind angle offset
(manual calibration)
OFFS
Apparent wind angle
Shop mode (on/off)
SHOP
Apparent wind angle
NMEA In/Out
n183
Apparent wind angle
Roblink On/Off
robl
Screen
Display
Screen 9 Screen 10 Screen 11
Analog
Digital
Apparent wind angle
Roblink test
tESt
Apparent wind angle
Communication
reset C.rES
Apparent wind angle
Master reset
rES
To enter the Installation Menu:
1. Press the
button, hold for 10 seconds and release to
access the Installation Mode.
2. Apply a short press on the
or button to select one of
the LCD screens in the Installation Mode.
3. Press the
button, hold for 2 seconds and release to access
a setting. The item to be set starts flashing.
4. Apply a short press on the
or button to select a new
setting.
5. Press the
button and hold for 2 seconds to save a setting.
6. Apply a short press on the
button to show the next screen
or
press the button and hold for 2 seconds to return to
normal operation.