Specifications

Operation of IS15 Multi
20220760L 43
To Freeze the Race Timer
See page 25.
To Reset the Race Timer and Race Log
The Race Timer may be stopped and reset at any time that it is
running, before or after the start of a race, as below:
1. Select the Race Time display screen.
2. Press and hold the
button to reset the Race Time to the
previous start time and to reset the Race Log to “---”.
The Race Timer instructions are echoed to all other Combi and
Multi instruments so that Start/Freeze/Reset occur synchronously
(together).
Screen 3
LOCAL TIME
This is the same as screen 4 in Group 5: ‘Nav2’. See page 40.
Note ! See notes about the Race Timer on page 24 and 25.
3.11 Screen Group 7: Log
There are four main screens and no sub-screens in this group:
Screen 1
CUMULATIVE LOG
• The upper screen section displays ‘LOG’ and the unit, ‘NM’
or ‘KM’ (Nautical miles or Kilometers).
• The lower screen section displays the Cumulative Log
reading.
The Cumulative Log is the total distance travelled by the vessel,
it cannot be reset unless you perform a Master Reset.
Screen 2
TRIP LOG
• The upper screen section displays ‘TRIP’ and the Trip Log
unit, ‘NM’ or ‘KM’.
• The lower screen section displays the Trip Log reading.
The Trip Log can be reset, but is not lost when the system is
turned off.