Specifications

IS15 General Manual
26 20220760L
Screen 3
CUMULATIVE LOG
TRIP LOG
PASSAGE TIME
• The upper screen section displays ‘LOG’, the cumulative log
value and the units, ‘nm’ or ‘km’. The cumulative log is the
total distance traveled by the vessel. It can only be reset by a
Master Reset.
• The middle screen section displays ‘TRIP’, the trip log value
and the units, ‘nm’ or ‘km’. The trip log can be reset, but is
not lost when the system is turned off.
• The lower screen section displays ‘PASSAGE TIME’, hours,
minutes and seconds. Passage Time is the time since the
system was powered up or since it was last reset.
Screen 3 has no sub-screen.
To Reset the Passage Time to Zero
The passage time may be reset at any time, as per below:
1. Select the Log, Trip Log and Passage Time screen (3).
2. Press the RESET button and hold for 2 seconds. The Passage
Time, Average Speed and Max Speed will be reset.
To Reset the Trip Log to Zero
The trip log may be reset together with the passage time at any
time, as per below:
1. Select the Log, Trip Log and Passage Time display screen (3).
2. Press the RESET button and hold for 2 seconds. This will
initially reset the Passage Time, Average Speed and Max
Speed. Press and hold the button once more and the Trip Log
will also be reset.
Note ! The Trip Log and Passage Time are system wide, resetting it on
one instrument will reset it across the whole system.