Specifications

Operation of IS15 Combi
20220760L 9
2 OPERATION OF THE IS15 COMBI INSTRUMENT
2.1 General Description
The instrument is operated by five buttons. By pressing one of
the arrow buttons you can move up, down, or sideways through
the selection of display screens that are available. The table of
screens is shown on page 11. The reset button is only active on
some of the screens. When a button is pressed a beep will
confirm the operation.
The display is divided into three sections, each section normally
containing one set of information. On some screens a graphical
display may cover more than one section.
2.2 Powering Up
When the instruments are powered up for the first time, see
section 7.1. ‘First time turn on’ on page 89.
At normal power up, each instrument shows the start-up screen
with the software version for approximately two seconds. The
display will then change to show the screen that was on at turn-
off.
2.3 Display backlighting
Press the button and hold for 2 seconds. The display then
presents the backlighting level. Repeat pressing until desired
backlighting level. Selectable values are 1-7 and off (0).
LCD
Display
Screen group
reverse button
Screen group
advance button
Screen reverse
button
Screen advance
button/illumination
control
Reset button
Upper screen
section
Lower screen
section
Middle screen
section