Specifications

IS15 General Manual
100 20220760L
Screen 4
HEADING SOURCE
Test screen on IS15 Combi only
7.10 Rudder Screen Group
The Rudder Screen Group applies only for the IS15 Combi.
Screen 1 Rudder angle offset
Local offset adjustment on instrument.
Activate pressing the
button (2 seconds)
Adjust offset to Stbd using the
button (+)
Adjust offset to port using the
button (–)
Screen 2 Rudder angle source
Tells you that IS15 gets valid rudder angle data on NMEA (from
autopilot)
If there is no data available at turn on the display will tell you as
shown.
7.11 Expander Screen Group
These screens are displayed in all system configurations but
applies only when an Expander is installed.
Screen 1
LOCAL MASTER RESET (Expander only)
Press the
button to master reset the expander. The display
will than read 'done'.
Screen 2
SOFTWARE VERSION
Displays the Expander software version.