Installation manual

Operation
53
850-164385 / Rev.C
Installation of options
The following options can be installed on the SH80 sonar:
 Triple- or multiple-frequency
 Scientific output
Note that all options are pre-programmed into the standard
sonar version, and that Simrad offer a 1 month free test period
for certain options. When ordering a permanent option
installation, a code word will be released from Simrad.
For a free test, or permanent option installation, use the
following procedure:
1. Select the Setup menu.
2. Press the Test button to activate the System test menu.
3. Press the Installation Menu button.
4. Observe that the installation menu bar is shown on the top
of the screen.
5. Press Options on the menu bar.
6. Select Install Options to activate the Install options
parameter dialogue.
The following parameters are available in the Install options
dialogue.
HWID - This field displays the unique 12-character Hardware
Identification code. This code is different for each SH80 sonar.
Simrad uses this code to generate the 32-characters code word
used for a permanent option installation.
Try - A number of buttons, where each will start the 1 month
free test period for the chosen option.