Installation manual

Menu descriptions
Data Source: This button is used to select the bearing source of
the vertical views. If you select
Audio, the vertical slice will
follow the trainable audio channel. If you select
Indicator,the
bearing of the vertical slice can be adjusted independent of the
audio channel. (► Data Source on page 112)
Direction Indicator: This feature allows you to train the vertical
slices independent of the audio channel. The direction indicator
is shown in the horizontal presentation as a yellow dotted line.
(► Direction Indicator on page 116)
CatchView menu
The CatchView menu is activated
by pressing the
View button on the
Operating Panel (or the m
iddle mouse
button) while the cursor is located in
the Catch view, and then selecting
View
menu
in the View pop-up.
This menu provides control of selected
parameters related to the current data
displayed in the Catch view. The
Close
button closes this menu. The Help
button opens the on-line help.
Note
The Catch view is only available in the
270º/Vertical, True Motion/Vertical and
Bow up/Vertical display modes, and you
may need to hide the menu to see it.
Buttons
Range: Click this button to select the horizontal range. (► Range
(CatchView) on page 142)
164385/E 97