Installation manual

Menu descriptions
View menus
The view menus are activated from the View pop-up menu, which
again is accessed using the
View buttonontheOperatingPanel
or the middle m ouse button. The view menus are shown with
vertical tabs on the right hand side, and the menus can easily be
closed using the
Close button in the lower part of each menu. All
menus have access to on-line help through a
Help button.
Topics
GeoView menu on page 95
VerticalView menu on page 96
CatchView menu on page 97
GeoView menu
The GeoView menu is activated by
pressing the
View button on the
Operating Panel or the m
iddle mouse
button in any horizontal view, and then
selecting
View Menu in the View pop-up.
This menu provides control of selected
parameters related to the current data
displayed in the horizontal view; the
scale and target track. It also provides
you with a button to reposition the
vessel symbol. The
Close button closes
this menu. The
Help button opens the
on-line help.
The
GeoView2 menu is identical to the
GeoView. It is shown when you operate
in the second view in a Dual 1 or Dual
2 operational modes.
164385/E 95