Installation manual

Menu descriptions
Catch View pop-up
The Catch View pop-up menu is accessed by pressing the View
button on the Operating Panel (or the m iddle mouse button) when
the cursor is located in a Catch Data view.
Parameters
In all, the following parameters are provided:
Erase Echoes: When this function is selected, all echoes displayed
on the sonar view will be deleted.
Make Same Size: When this function is selected, window areas
tiled vertically will acquire the same width.
Grey scale data: This c ommand changes the display from a colour
presentation to a black-and-white. The number of shades of grey
and the number of different colours used will be the same. The
grey scale presentation can be selected for singular sonar views
independent of each other. Click one more time to restore the
colours.
View Menu: When this function is selected menus will be
displayed according to the view in which the cursor is situated.
Several different
View menus are available.
Object pop-up menu
The Object pop-up menu is accessed using the Object button over
the trackball on the Operating Panel, or the r
ight mouse button if
an optional computer mouse is installed.
This pop-up menu is mainly used when you operate the sonar
from an optional mouse, as most of the functions on it can be
selected directly on the Operating Panel. Note that the cursor
related selections in the
Object pop-up menu use the cursor
position where the pop-up menu was activated.
For more information about the
Object on the Operating Panel,
see Cursor field on page 70.
When you open the Object pop-up menu with the cursor
positioned over a defined object on the display, it will display the
following additional parameters:
• Inspect [object]
• Delete [object]
• Make [object] priority target
Basic parameter s
These menu choices provide the same functions as their
respective buttons on the Operating Panel.
164385/E 93