Installation manual

Simrad SH80
Pop-up menus
The pop-up menus are accessed using the View and Object
buttons on the Operating P anel, or the middle and right mouse
buttons if an optional computer mouse is installed. Each button
will present a small menu appearing at the cursor’s current
location. To make a selection, position the arrow cursor by means
of the trackball. Then, press the
Select button on the Operating
Panel or the l
eft mouse button.
Topics
View pop-up menu on page 92
Catch View pop-up on page 93
Object pop-up menu on page 93
View pop-up menu
The View pop-up menu is accessed using the View button on
the Operating Panel (or the m
iddle mouse button if an optional
computer mouse is installed).
Parameters
Set New Display Centre: When this function is selected, the new
display centre i s moved to the cursor’s position where the
View
menu was activated.
Ship To Centre: When this function is selected, the own ship
symbol is moved to the centre of the view.
Zoom: The zoom function magnifies an area of the display by
positioning the cursor in its centre and pressing the
Zoom button.
The
Zoom button works as a toggle switch for on/off of the zoom
function.
Erase Echoes: When this function is selected, all echoes displayed
on the sonar view will be deleted.
Synchronize - This function is not operational on the sonar. For
synchronization to external equipment, refer to the
Setup menu.
Make Same Size: When this function is selected, window areas
tiled vertically will acquire the same width.
Grey scale data: This c ommand changes the display from a colour
presentation to a black-and-white. The number of shades of grey
and the number of different colours used will be the same. The
grey scale presentation can be selected for singular sonar views
independent of each other. Click one more time to restore the
colours.
View Menu: When this function is selected menus will be
displayed according to the view in which the cursor is situated.
Several different
View menus are available.
92 164385/E