Installation manual

Menu descriptions
Interpolation: This is a built-in software function that may give a
more realistic presentation of the echoes.
Message bar: This button opens the Message bar parameter
dialogue, which allows you to monitor operational messages
from the sonar. (► Message Bar on page 129)
Installation menu: This button opens the Installation menu on the
top of the display. This menu is used during installation of the
sonar, and i nformation about this is provided in the Installation
manual.
About: This button provides access to a small information
dialogue providing the current software version. (► About on
page 105)
Sort Modes menu
The Sort Modes menu is activated by
the
Sort Modes buttonintheSetup
menu. (► Setup menu on page 84)
This menu is used to select the display
modes to be activated by the four
Mode
buttons on the Operating Panel. The
four upper display modes in this m enu
will always be the modes selected by
the four
Mode buttons in the order they
are sorted.
In order to sort the modes, click on a
mode to select it, and click the
Move
Up
and Move Down buttons to move
the selected mode up or down the list.
When the modes are organized in the
requested order, click the
Apply button
to save the setting, and
Close to close
the menu.
For additional information, see Mode
procedures on page 38.
164385/E 91