Installation manual

Simrad SH80

Objects menu

The Objects menu is shown in all display modes, and displays the

range (R), bearing (B) and depth (D) to all selected objects. The

identifying abbreviations for the different objects are:

• AT: Automatic Target Track marker

• Ci: C ircle marker

• M:Targetmarker

• OS: Own Ship marker

• PT: Position Track marker

• F: Radio Buoy marker (if a GPS buoy system is connected)

For additional information, see Markers and symbols procedures

on page 39.

To delete an object, select the relevant

marker in the list, and click the

Delete

button in the lower part of the menu.

Clicking the

Delete All button will

delete all objects.

The number behind the identifying

abbreviation refers to the same number

on the object in the sonar presentation.

The P after the

Automatic Target Track

marker indicates the priority level

where the audio channel is locked to

the target.

When selecting an object in the list,

a list with all t he available object

data will be shown below the

Objects

menu. When selecting a Target marker,

Automatic Target Track marker or a

Radio Buoy marker in the list, a dotted

bearing line from the vessel to the

marker will be presented.

The parameters for each marker are

shown in the

Inspect Object parameter

dialogue. Click on a marker to

investigate its parameters. (► Inspect

Object on page 126)

Buttons

Delete: Click this button to delete the currently selected object.

Delete All: Click this button to delete all objects.

164385/E