Installation manual

Simrad SH80
Setup menu
The Setup menu is shown in all display
modes, and gives access to parameters
controlling the processing and algorithms
in the sonar system. It also provides
access to specific system parameters and
functions such as
Test and Store/Recall.
Buttons
Store/Recall: Click this button to record and playback sonar
images. (► Store/Recall menu on page 89)
Test: Click this button to access the sonar’s test software. These
utilities are only provided for certified service technicians, and
they are not documented. (► System Test menu on page 90)
Gear: This button is used to select the type of fishing gear you
use, and to get the right size and position of the gear on the
display. (► Gear on page 124)
School: This parameter is used to obtain information of the
volume estimation of a school in the automatic target tracking
program. (► School Data on page 148)
Dead Reckoning: This on/off function is used to improve the
position of the historical track line from the vessel, relative to the
actual position of the drifting fishing gear. (► Dead Reckoning
on page 114)
Stabilizer: When this function is active, the sonar will
automatically adjust the sonar picture to compensate for the
ship’s movements in the sea. (► Stabilizer on page 154)
84
164385/E