Installation manual

Operating panel
Target track
To track a target, place the cursor over the desired location and
press the
Target Track button. A circle will appear on the display
and its position automatically tracked by the system using the
strongest echo centred in the ”window” represented by two lines
on the audio line. The “window’s” size may be selected by the
Track Window button in the Setup menu.
The vector originating from the target’s centre indicates its
course and speed. The length of the vector increases relative
to the target’s speed. One knot is represented by a small mark
on the vector. A course line can also be displayed showing the
target’s track.
Target tracking symbols and data are displayed with a light violet
colour. In addition to the information on the Catch data page, the
speed, course and distance for some modes are found in the lower
left hand corner of the screen.
In Manual tilt mode, the tilt angle will automatically be adjusted
with respect to the distance to the tracked target.
When the Auto tilt function is activated in the Target track mode,
the tilt search centre is automatically adjusted with regard to the
distance to the tracked position.
Note
Manual training overrides the Target Tracking function.
164385/E 73