Installation manual

Operating panel
Main switch field
The Main switch buttons controls the power on/off sequence and
the hoisting and lowering of the transducer array. It also indicates
the transducer array’s current position.
Middle
Up
Down
MAIN SW.
POWER
(CD015022N)
Power
Pushing Power for approximately two seconds powers up t he
sonar. The adjacent green LED blinks while the Processor Unit
boots up, and remains illuminated once the system is operational.
Before the sonar can be powered down, the transducer must be in
the upper position. Pushing the
Power button for approximately
two seconds secures power to the unit which is confirmed by the
adjacent green LED being extinguished.
Up
This button raises the transducer to its upper position. The
adjacent green LED blinks while the transducer is raised and
remains illuminated once it is housed safely inside the hull of the
vessel. The green blinking LED will also be accompanied by
an audible signal.
Middle
The Middle button is not used.
Down
The Down button lowers the transducer to its lower position. The
adjacent green LED blinks while the transducer is lowered and
remains illuminated when lower position is reached. The green
blinking LED will also be accompanied by an audible signal.
164385/E 65