Installation manual

Display modes
True motion
When True motion mode is selected, the picture is locked to a
geographical position, where the vessel moves around the screen
according to its present course and speed. All echoes are always
presented in their correct position relative to the vessel, and their
movements on the screen will be a true representation of the
movements of the targets through the water.
Figure 17 “True motion” display mode
When the vessel symbol reaches the edge of the screen, it will
automatically be moved back to the centre, or to a position
determined by the
Off Centre button on the Operating Panel.
This position is r eset to the screen centre whenever the mode is
changed. When you press the
Target Track button, the target will
automatically be moved to the screen centre.
164385/E 57