Installation manual

Simrad SH80
1 Click the Setup tabtoopentheSetup menu.
2 Click the
Default setting button.
3 Click
OK in the next parameter dialogue to confirm the
action.
The factory settings are loaded and implemented.
Installation of options
The following options can be installed on the SH80 sonar:
• Triple- or multiple-frequency
• Scientific output
Note that all options are pre-programmed into the standard sonar
version, and that Simrad offer a 1 month free test period for
certain options. When ordering a permanent option installation,
a code word will be released from Simrad. For a free test, or
permanent option installation, use the following procedure:
1 Select the
Setup menu.
2 Click the
Test button to open the System test menu.
3 Click the
Installation Menu button.
4 Observe that the installation menu bar is shown on the top
of the screen.
5 Click
Options →Install options.
6 Observe that the Install Options parameter dialogue opens.
The following parameters are available in the Install options
dialogue.
HWID:Thisfield displays the unique 12-character hardware
identification code. This code is different for each SH80 sonar.
Simrad uses this code to generate the 32-character code word
used for a permanent option installation.
Try: Each will start the 1 month free test period for the chosen
option.
Note
If any time or date adjustments are made during t he test period,
the option w ill be closed.
52 164385/E