Installation manual

Simrad SH80

How to recall sonar images

Observe the following procedure to recall sonar images.

1 Click the Setup tab to open the menu.

2 Click the

Store/Recall button to open the Store/Recall menu.

3 Observe the list of images in the

Store/Recall menu.

To recall a single image:

1 Click the Recall mode button, and select Single shot.

2 Click one of the images to select it.

3 Click the

Recall button to view the image.

• The chosen image will be displayed. The phrase

“RECALL” is used to indicate that a recalled image has

replaced the sonar image.

4 Click the

Object button on the Operating Panel to restore

normal operation.

To recall several images:

1 Click the Recall mode button, and select how long time you

wish to see each image.

2 To select a number of images ﬁles, click the top ﬁle, then

hold the

Select button on the Operating Panel depressed

while you move the cursor down to select the other ﬁles in

the ﬁeld.

3 Click the

Recall button to view the images.

• The chosen images will be displayed, one by one. The

phrase “RECALL” is used to indicate that a recalled

image has replaced the sonar image.

• When all images has been displayed, the sonar will

automatically resume normal operation.

How to keep sonar images

When you store new sonar images, they will by default be added

to the list of

Temporary ﬁles. This list will contain maximum 100

images, and when this limit has been reached, the oldest ﬁles will

be automatically removed. Observe the following procedure t o

keep selected sonar images from being deleted.

1 Click the

Setup tab to open the menu.

2 Click the

Store/Recall button to open the Store/Recall menu.

164385/E