Installation manual

ManualsBrandsSimrad ManualsFish Finding SonarSH80 - REV C

Simrad SH80

2 Observe that all the current objects (markers and symbols)

are listed.

•The

Objects menu is shown in all display modes, and

displays the range (R), bearing (B) and depth (D) t o all

selected objects.

•Theidentiﬁcation (ID) abbreviations for the different

objects are:

– AT: Automatic target track marker

– Ci: Circle marker

– M: Target marker

– OS: Own Ship marker

– PT: Position track marker

– F: Radio buoy marker

• The number behind the ID abbreviation refers to the

same number on the object in the sonar presentation. The

“P” after the Automatic target track m arker indicates the

priority level where the audio channel is locked to the

target.

• When you select a

Target marker, Automatic target track

marker

or a Radio buoy marker in the list, a dotted bearing

line from the vessel to t he marker will be shown.

3 To retrieve the information about an object, click the object

abbreviation in the list.

4 Observe that a dedicated parameter dialogue with all known

object information appears at the bottom of the menu.

How to delete a marker or symbol

Observe the following procedures to delete a marker or object

from the sonar presentation.

1 Click the

Objects tab to open t he menu.

2 Click on the object that you wish to delete.

3 Click the

Delete button at the bottom of the list.

Alternatively:

1 Place the cursor on the object.

2 Press the

Object button on the Operating Panel (or the right

mouse button)

3 Click

Delete on the menu.

Storage procedures

This section explains how to store and recall sonar images on

the SH80.

164385/E