Installation manual

Operational procedures
1 Click the Display tab to open the Display menu.
2 Click the
Mode Buttons: button to select Mode or User.
How t o sort t he operational modes
Your SH80 sonar provides you with a selection of operational
modes. This list of modes can be sorted to suit your preferences.
The top four modes on your list can be accessed by pressing the
four
Mode buttons on the Operating Panel. To sort the modes,
observe the procedure.
1 Click the
Setup tabtoopentheSetup menu.
2 Click the
Sort Modes button to open the Sort Modes menu.
•The
Sort Modes menu lists all the available modes in their
current order.
3 Click one of the operational modes.
• Observe that the
Move down and/or Move up buttons at
the bottom of the menu are activated.
4 Click the
Move down or Move up button to move the chosen
operational mode down or up the list.
5 When the list has been arranged in the order you wish to
keep, click
Apply.
• The current order is saved automatically.
6 Click
Close to exit.
Markers and symbols procedures
This section explains how to add, investigate a nd delete symbols
and markers on the SH80 sonar presentation.
How to add target and circle markers
Observe the following procedure to add a target or circle marker
to the sonar presentation.
1 Move the cursor on the sonar picture, and position it
wherever you wish to place the marker.
2 Press the requested marker button in the
Symbol fieldonthe
Operating Panel to place the marker.
164385/E 39