Installation manual

Simrad SH80
Visual aids
The sonar display contains not only the sonar picture and the
menu system, but also other information that is useful for
efcient operation.
Common information on the display
In nearly all display modes, the following information is
provided.
Figure 9 Visual aids
(CD015013A)
AB
C
D
E
F
(A) Current gain.
(B) Current range.
(C) The cursors current geographical position (provided
that the
necessary sensor is connected to the sonar).
(D) The cursors current bearing relative to the ve
ssel or true
north (provided that the necessary sensor is conn
ected to the
sonar).
(E) Current tilt.
(F) Current range and depth to the target.
Moving the boundary lines
In most display modes with multiple views, the size of each view
can easily be modied by moving the boundary line between the
views. Observe the following procedure:
1 Place the cursor on the boundary line. Observe that it
changes its shape to a double arrow ().
2 Press a
nd hold the Select buttonontheOperatingPanel.
3 Move the cursor with the
Select button depressed. Observe
that the boundary line is moved.
4 Release the
Select button.
5 Observe that the boundary line has been relocated to the new
cursor position.
30
164385/E