Installation manual

Getting started
Control the cursor
CURSOR
SONAR OPERATING PANEL
Menu
Select
View
Object
(CD015022L)
A
B
Operate the trackball (A) on the Operating
Panel.
Observe that the cursor moves on the sonar
display, and that it changes its form depending
on its location.
Observe the location of the
Select button (B).
Press this button to make a selection.
The
View and Object buttons above the trackball
are used to open specific menus.
Menu buttons
Each menu contains several buttons. Each button shows both the
function and the current parameter. The majority of the buttons
in each menu field have three functions:
• You can select a lower parameter value.
• You can select a higher parameter value.
• You can open the applicable parameter dialogue.
(C )D015010A
+
-
BA
C
(A) Click here to decrease
the parameter value
(B) Click here to increase
the parameter value
(C) Click here to open the
parameter dialogue.
Use the trackball on the Operating Panel, and position the
cursor over the l
eft side of the button (A). Observe that
the shape of the cursor changes to a “minus” sign. This
means that the value of the parameter will decrease when
you press the
Select button on the Operating Panel.
Position the cursor over the r
ight side of the button (B).
Observe that the shape of the cursor changes t o a “plus”
sign. This means that the value of the parameter will
increase when you press the
Select button.
Position the cursor on the centre of the menu button (C).
Observe that the shape of the cursor changes to a “menu”
symbol. This means that the applicable parameter dialogue
will open when you press t he
Select button. The dialogue
appears in the lower part of the menu field.
164385/E 27