Installation manual

Simrad SH80
The menu structure
The menu on the right hand side of the sonar display contains
several different buttons, tabs and parameter dialogues.
(CD015009B)
A
C
D
E
F
B
The following elements are in use on the menu:
(A) Sonar type:Thisfield simply states the name
of the sonar.
(B) M ode: Click here to change display mode.
If you click on the middle of the button you will
open a dedicated menu for mode selection. If
you click on the right or left side of the button
you can scroll through the available modes.
(C) Tab: Click on a t ab to bring forward the
menu. In this example, when you click on the
Display tab, you will open the Display menu.
(D) M enu : This is the body of the menu. Each
menu holds one or more buttons.
(E) Button: Click on a button to change the
applicable parameter. If you click on the middle
of the button you will normally open a dedicated
parameter dialogue for parameter selection. If
you click on the right or left side of the button
you can scroll through the available choices.
(F) P arameter dialogue: When you click a
button, the relevant parameter dialogue opens
at the bottom of the menu. Each parameter
dialogue holds one or more buttons or menus.
To close a parameter dialogue, click the
Close
button. Most dialogues provide a Help button
for access to the on-line help. In this example
you can see the
Status dilalogue, which is
replaced when a parameter dialogue is opened.
26
164385/E